9:01 AM
I know most of you find it easier to use a flash drive rather than using a disk drive. The reasons, for instance, could be your cd-drive not functioning properly just like mine. May be you do not want to spend money on a CD. Moreover, installation takes place faster through a flash drive when compared to a CD.
Here is all what you need to install your OS through a flash drive:
1. A USB flash drive, 1Gig or larger
2. OS installation Disk
3. List of Assorted files that i'm going to mention here
NOTE: your BIOS should support USB boot, which might be lacking in some of the
earlier systems.
Preparing the Flash Drive:
1. Download and unzip this file, whihc should contain two folders: 1 titled Bootsect, and the other USB_prep8.
2. Navigate to the USB_prep8 folder and click on USB_prep8.cmd. This will
bring up a Window console.
3. Press any key to continue and a PeToUSB window will open.
4. Make sure your flash drive is selected, and click start to format your flash drive.
5. When the format is complete, click OK, but do not close the PeToUSB window or the Windows Console
6. Open a new console window by typing “cmd” into the run box in the Windows Start Menu.
7. Find your Bootsect folder (if you’re not used to DOS commands, you can type “dir” to list directories and files, type “cd foldername” to navigate to a folder name – called foldername in this example, and if there’s a long folder name you can save time by typing the “cd” and just the first few letters and then hitting the Tab key to fill in the rest of the name).
8. Once you’re in the Bootsect folder, type “bootsect.exe /nt52 g:” if “g” is the letter assigned to your flash drive. If it’s E, then change the letter to e. If it’s Z, make it z. Get it?
9. When this is done, you should see a message letting you know that the bootcode was updated, and you can close this console window (but not the other console window).
10. Close the PeToUSb Window, but make sure not to close the remaining console window yet
11. You should now see a list of 8 options in the console.
12. Select one and find the drive with your Windows installation disc.
13. Select 2 and pick a random drive letter (but not one that’s already on your PC, since this will be a virtual drive used for copying your files).
14. Select 3 and enter the drive letter for your USB flash drive.
15. Select 4 and follow the rest of the on-screen directions and you should be all set.
The process should take about 15-20 minutes. When it’s done, you should have a bootable USB stick that you can use to install Windows XP the same way you would if you had a CD/DVD drive.
A few notes here. There’s a chance you may get down to step 15 and the program will tell you that it can’t create the virtual drive. This may happen if you’ve already gone through the whole process and are trying to do it again to fix problems. The solution seems to be rebooting your computer and trying again. Or at least that’s what worked for me. Once your usb drive is ready, go to your bios and set USB to first position in boot order. Now plug the usb and restart. Enjoyy.!!
Creating a bootable ubuntu / linux pen drive:
Here is all what you need to install your OS through a flash drive:
1. A USB flash drive, 1Gig or larger
2. OS installation Disk
3. List of Assorted files that i'm going to mention here
NOTE: your BIOS should support USB boot, which might be lacking in some of the
earlier systems.
Preparing the Flash Drive:
1. Download and unzip this file, whihc should contain two folders: 1 titled Bootsect, and the other USB_prep8.
2. Navigate to the USB_prep8 folder and click on USB_prep8.cmd. This will
bring up a Window console.
3. Press any key to continue and a PeToUSB window will open.
4. Make sure your flash drive is selected, and click start to format your flash drive.
5. When the format is complete, click OK, but do not close the PeToUSB window or the Windows Console
6. Open a new console window by typing “cmd” into the run box in the Windows Start Menu.
7. Find your Bootsect folder (if you’re not used to DOS commands, you can type “dir” to list directories and files, type “cd foldername” to navigate to a folder name – called foldername in this example, and if there’s a long folder name you can save time by typing the “cd” and just the first few letters and then hitting the Tab key to fill in the rest of the name).
8. Once you’re in the Bootsect folder, type “bootsect.exe /nt52 g:” if “g” is the letter assigned to your flash drive. If it’s E, then change the letter to e. If it’s Z, make it z. Get it?
9. When this is done, you should see a message letting you know that the bootcode was updated, and you can close this console window (but not the other console window).
10. Close the PeToUSb Window, but make sure not to close the remaining console window yet
11. You should now see a list of 8 options in the console.
12. Select one and find the drive with your Windows installation disc.
13. Select 2 and pick a random drive letter (but not one that’s already on your PC, since this will be a virtual drive used for copying your files).
14. Select 3 and enter the drive letter for your USB flash drive.
15. Select 4 and follow the rest of the on-screen directions and you should be all set.
The process should take about 15-20 minutes. When it’s done, you should have a bootable USB stick that you can use to install Windows XP the same way you would if you had a CD/DVD drive.
A few notes here. There’s a chance you may get down to step 15 and the program will tell you that it can’t create the virtual drive. This may happen if you’ve already gone through the whole process and are trying to do it again to fix problems. The solution seems to be rebooting your computer and trying again. Or at least that’s what worked for me. Once your usb drive is ready, go to your bios and set USB to first position in boot order. Now plug the usb and restart. Enjoyy.!!
Creating a bootable ubuntu / linux pen drive:
- First copy the iso file of the linux version you want to install on to your hard drive.
- Download unetbootin from http://unetbootin.sourceforge.net/
- Then double click the unetbootin file.
- This will open up a small window, select disk image and browse to the image on your hard drive and click ok.
- You bootable pen drive should be ready in 5 to 10 minutes
Posted in: installing os through pen drive,Technology,timesofcommerce,Utilities
0 comments:
Post a Comment